# 39=5 rejection **URL:** \ **Category:** General Q&A\ **Tags:** imported, 44-changes, xid\_165430\ **Created:** [May 5, 2008, 1:59pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884 "2008-05-05T13:59:06Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![sreeadusumilli38\_x](https://avatars.discourse-cdn.com/v4/letter/s/e9a140/32.png) [@sreeadusumilli38\_x](https://forum.fixtrading.org/u/sreeadusumilli38_x)\ **Post date:** [May 5, 2008, 1:59pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/1 "2008-05-05T13:59:06Z")
Imported from previous forum ---
**Author:** ![sreeadusumilli38\_x](https://avatars.discourse-cdn.com/v4/letter/s/e9a140/32.png) [@sreeadusumilli38\_x](https://forum.fixtrading.org/u/sreeadusumilli38_x)\ **Post date:** [May 5, 2008, 1:59pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/2 "2008-05-05T13:59:06Z")
Hi, Uing FIX 4.4…39=5 getting rejected with the error VALUE OUT OF BOUNDS: Value: 5 out of bounds: 0,1,2,3,4,6,7,8,9,A,B,C,D,E in field: OrdStatus (tag #39). Any ideas? Also, how/where to check \*\*\* SOME VALUES HAVE BEEN REPLACED - See “Replaced Features and Supported Approach” \*\*\* which we see for some FIX field descriptions? Regards ---
**Author:** ![fplpo\_x](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@fplpo\_x](https://forum.fixtrading.org/u/fplpo_x)\ **Post date:** [May 5, 2008, 2:18pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/3 "2008-05-05T14:18:52Z")
[original email was from John Prewett - [jprewett@lavatrading.com](mailto:jprewett@lavatrading.com) ] \> Hi, > Uing FIX 4.4…39=5 getting rejected with the error VALUE OUT OF BOUNDS: > Value: 5 out of bounds: 0,1,2,3,4,6,7,8,9,A,B,C,D,E in field: OrdStatus > (tag #39). Any ideas? > > Also, how/where to check \*\*\* SOME VALUES HAVE BEEN REPLACED - See > “Replaced Features and Supported Approach” \*\*\* which we see for some FIX > field descriptions? > > Regards Some FIX field clarification: OrdStatus(tag 39) = the current state of the order. ExecType(tag 150) = the reason why an ExecReport is being sent. In FIX.4.4, the value ‘5’ (replaced) is no longer considered a valid value for OrdStatus as it really is a reason why an ExecReport is being sent and not an order state. OrdStatus=5 was acceptable in prior versions of FIX, but not starting from FIX.4.4. To indicate an order has been successfully replaced, an ExecReport should have ExecType(150)=5 and an OrdStatus indicating the current status of the order. I apologize, but I don’t understand your second question. JohnP ---
**Author:** ![sreeadusumilli38\_x](https://avatars.discourse-cdn.com/v4/letter/s/e9a140/32.png) [@sreeadusumilli38\_x](https://forum.fixtrading.org/u/sreeadusumilli38_x)\ **Post date:** [May 5, 2008, 2:28pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/4 "2008-05-05T14:28:25Z")
> > Hi, > > > > Uing FIX 4.4…39=5 getting rejected with the error VALUE OUT OF > > BOUNDS: Value: 5 out of bounds: 0,1,2,3,4,6,7,8,9,A,B,C,D,E in field: > > OrdStatus (tag #39). Any ideas? > > > > Also, how/where to check \*\*\* SOME VALUES HAVE BEEN REPLACED - See > > “Replaced Features and Supported Approach” \*\*\* which we see for some > > FIX field descriptions? > > > > Regards > > Some FIX field clarification: OrdStatus(tag 39) = the current state > of the order. ExecType(tag 150) = the reason why an ExecReport is > being sent. > > In FIX.4.4, the value ‘5’ (replaced) is no longer considered a valid > value for OrdStatus as it really is a reason why an ExecReport is being > sent and not an order state. OrdStatus=5 was acceptable in prior > versions of FIX, but not starting from FIX.4.4. > > To indicate an order has been successfully replaced, an ExecReport > should have ExecType(150)=5 and an OrdStatus indicating the current > status of the order. > > I apologize, but I don’t understand your second question. > > JohnP Thank you very much for the quick response. Second question is, I would like to know how to check Volume 1: “Glossary” as mentioned in the field value description for tga39… Identifies current status of order. Valid values: 0 = New 1 = Partially filled 2 = Filled 3 = Done for day 4 = Canceled 5 = Replaced (Removed - Replaced) 6 = Pending Cancel (e.g. result of Order Cancel Request) 7 = Stopped 8 = Rejected 9 = Suspended A = Pending New B = Calculated C = Expired D = Accepted for bidding E = Pending Replace (e.g. result of Order Cancel - Replace Request) \*\*\* SOME VALUES HAVE BEEN REPLACED - See “Replaced Features and Supported Approach” \*\*\* (see Volume 1: “Glossary” for value definitions) ---
**Author:** ![fplpo\_x](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@fplpo\_x](https://forum.fixtrading.org/u/fplpo_x)\ **Post date:** [May 5, 2008, 2:53pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/5 "2008-05-05T14:53:46Z")
[original email was from Dean Kauffman - [dean.kauffman@tradeweb.com](mailto:dean.kauffman@tradeweb.com) ] \> \> \> Hi, > > > Uing FIX 4.4…39=5 getting rejected with the error VALUE OUT OF > > > BOUNDS: Value: 5 out of bounds: 0,1,2,3,4,6,7,8,9,A,B,C,D,E in > > > field: OrdStatus (tag #39). Any ideas? > > > > > > Also, how/where to check \*\*\* SOME VALUES HAVE BEEN REPLACED - See > > > “Replaced Features and Supported Approach” \*\*\* which we see for some > > > FIX field descriptions? > > > > > > Regards > > > > Some FIX field clarification: OrdStatus(tag 39) = the current state > > of the order. ExecType(tag 150) = the reason why an ExecReport is > > being sent. > > > > In FIX.4.4, the value ‘5’ (replaced) is no longer considered a valid > > value for OrdStatus as it really is a reason why an ExecReport is > > being sent and not an order state. OrdStatus=5 was acceptable in prior > > versions of FIX, but not starting from FIX.4.4. > > > > To indicate an order has been successfully replaced, an ExecReport > > should have ExecType(150)=5 and an OrdStatus indicating the current > > status of the order. > > > > I apologize, but I don’t understand your second question. > > > > JohnP > > Thank you very much for the quick response. Second question is, I would > like to know how to check Volume 1: “Glossary” as mentioned in the field > value description for tga39… > > Identifies current status of order. Valid values: = New 1 = Partially > filled 2 = Filled 3 = Done for day 4 = Canceled 5 = Replaced (Removed - > Replaced) 6 = Pending Cancel (e.g. result of Order Cancel Request) 7 = > Stopped 8 = Rejected 9 = Suspended A = Pending New B = Calculated C = > Expired D = Accepted for bidding E = Pending Replace (e.g. result of > Order Cancel - Replace Request) \*\*\* SOME VALUES HAVE BEEN REPLACED - See > “Replaced Features and Supported Approach” \*\*\* (see Volume 1: “Glossary” > for value definitions) In the FIX 4.4 spec the section Replaced Features and Supported Approach is Appendix 6-F in volume 6. ---
**Author:** ![robaldridge18\_x](https://avatars.discourse-cdn.com/v4/letter/r/f1d935/32.png) [@robaldridge18\_x](https://forum.fixtrading.org/u/robaldridge18_x)\ **Post date:** [January 5, 2009, 4:38pm UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/6 "2009-01-05T16:38:16Z")
> Some FIX field clarification: OrdStatus(tag 39) = the current state > of the order. ExecType(tag 150) = the reason why an ExecReport is > being sent. > > In FIX.4.4, the value ‘5’ (replaced) is no longer considered a valid > value for OrdStatus as it really is a reason why an ExecReport is being > sent and not an order state. OrdStatus=5 was acceptable in prior > versions of FIX, but not starting from FIX.4.4. > > To indicate an order has been successfully replaced, an ExecReport > should have ExecType(150)=5 and an OrdStatus indicating the current > status of the order. I am sorry to intrude but was hoping you could help. I have the same issue and “OrdStatus indicates the current status of the order” is stil confusing to me. My situation is that I have an exchange sending Fix 4.4 39=5, my FIX 4.4 engine does not support this value and so I reject the execution report. My interpretation is that if the exchange replace my order (off the back of a 35=G)then the logical value for them to send would be 39=5. If this is no longer available what value are you suggesting they use? Hope you can help ---
**Author:** ![fplpo\_x](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@fplpo\_x](https://forum.fixtrading.org/u/fplpo_x)\ **Post date:** [January 6, 2009, 2:57am UTC](https://forum.fixtrading.org/t/39-5-rejection/12884/7 "2009-01-06T02:57:32Z")
[original email was from Ryan Pierce (FPL Technical Director) - [ryan.pierce@fixprotocol.org](mailto:ryan.pierce@fixprotocol.org) ] \> I am sorry to intrude but was hoping you could help. I have the same > issue and “OrdStatus indicates the current status of the order” is stil > confusing to me. > > My situation is that I have an exchange sending Fix 4.4 39=5, my FIX 4.4 > engine does not support this value and so I reject the execution report. > > My interpretation is that if the exchange replace my order (off the back > of a 35=G)then the logical value for them to send would be 39=5. If this > is no longer available what value are you suggesting they use? > > Hope you can help The two most common values for OrdStatus in FIX 4.4 when ExecType=5 are 0 - New (if no shares have traded on the order) or 1 - Partially filled (if anything has traded on the order.) The FIX 4.4 spec has state change matrices that illustrate this. The Cancel/Replace examples are in sections C and D.