# fix and internet

**URL:** <https://forum.fixtrading.org/t/fix-and-internet/3631>\
**Category:** General Q&A\
**Tags:** general-qa, xid\_166977, imported\
**Created:** [December 9, 2000, 5:09am UTC](https://forum.fixtrading.org/t/fix-and-internet/3631 "2000-12-09T05:09:00Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![nageshmeriga\_x](https://avatars.discourse-cdn.com/v4/letter/n/f4b2a3/32.png) [@nageshmeriga\_x](https://forum.fixtrading.org/u/nageshmeriga_x)\
**Post date:** [December 9, 2000, 5:09am UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/1 "2000-12-09T05:09:00Z")

</div>

Imported from previous forum

---

<div class="post-metadata">

**Author:** ![nageshmeriga\_x](https://avatars.discourse-cdn.com/v4/letter/n/f4b2a3/32.png) [@nageshmeriga\_x](https://forum.fixtrading.org/u/nageshmeriga_x)\
**Post date:** [December 9, 2000, 5:09am UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/2 "2000-12-09T05:09:00Z")

</div>

hi all  
i have a doubt, if client is accessing through internet, how fix is implemented between client(he can access from any where in the world) and broker.  
thanx  
nagesh

---

<div class="post-metadata">

**Author:** ![scott.atwell](https://avatars.discourse-cdn.com/v4/letter/s/51bf81/32.png) [@scott.atwell](https://forum.fixtrading.org/u/scott.atwell)\
**Post date:** [December 11, 2000, 12:29pm UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/3 "2000-12-11T12:29:00Z")

</div>

Use of the Interent for the FIX session layer looks the same to a FIX engine as if the TCP socket were established via a private circuit.

See "More Information", "Presentations", "Effective Use of FIX via the Internet (Securities Industry News - NY - Sep 1998)", slides 8 through 15.

\> hi all  
\> i have a doubt, if client is accessing through internet, how fix is implemented between client(he can access from any where in the world) and broker.  
\> thanx  
\> nagesh  
\>

---

<div class="post-metadata">

**Author:** ![fplpo\_x](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@fplpo\_x](https://forum.fixtrading.org/u/fplpo_x)\
**Post date:** [December 11, 2000, 2:53pm UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/4 "2000-12-11T14:53:00Z")

</div>

[original email was from Ryan Pierce - [rpierce@taltrade.com](mailto:rpierce@taltrade.com) ]  
I’d also like to mention that when using FIX via the Internet, security becomes more of an issue.

Some of the more popular solutions include:

1. Using PGP-DES-MD5 FIX security. (This is the currently defined FIX security protocol)

2. Using SSL and/or TLS. (This is what the Encryption Working Group is leaning towards recommending as the future FIX security protocol)

3. Use a software or hardware-based VPN to pass your FIX session over the Internet using an encrypted and authenticated tunnel.

---

<div class="post-metadata">

**Author:** ![nageshmeriga\_x](https://avatars.discourse-cdn.com/v4/letter/n/f4b2a3/32.png) [@nageshmeriga\_x](https://forum.fixtrading.org/u/nageshmeriga_x)\
**Post date:** [December 12, 2000, 5:34am UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/5 "2000-12-12T05:34:00Z")

</div>

That’s O.k Ryan, but in case if the client is accessing through internet,all the clients cannot have fixengine connected to their systems from where they are trading.is there any way like FIX router/server…and what is the mode of messagetype between the client and FIX router/server.  
thanx  
nagesh

\> I’d also like to mention that when using FIX via the Internet, security becomes more of an issue.  
\>  
\> Some of the more popular solutions include:  
\>  
\> 1. Using PGP-DES-MD5 FIX security. (This is the currently defined FIX security protocol)  
\>  
\> 2. Using SSL and/or TLS. (This is what the Encryption Working Group is leaning towards recommending as the future FIX security protocol)  
\>  
\> 3. Use a software or hardware-based VPN to pass your FIX session over the Internet using an encrypted and authenticated tunnel.  
\>  
\>

---

<div class="post-metadata">

**Author:** ![fplpo\_x](https://avatars.discourse-cdn.com/v4/letter/f/7ab992/32.png) [@fplpo\_x](https://forum.fixtrading.org/u/fplpo_x)\
**Post date:** [December 12, 2000, 8:06am UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/6 "2000-12-12T08:06:00Z")

</div>

[original email was from Matt Koehler - [matt.koehler@transacttools.net](mailto:matt.koehler@transacttools.net) ]  
Sure they can. It depends on how you set it up, and on the engine. It sounds like you may be looking for a FIX engine/OMS ASP-type service, there are a few out there (Namsko comes to mind, there may be others.)

Or are you trying to say that some clients have firewall issues to contend with & so are unable to make connections over the internet…?

In any case - I’d seperate out the issue of the network solution (internet vs. private network vs. direct line) from whether an engine can be set up as a FIX message router (onBehalfOf…)

as Scott Atwell said - "Use of the Interent for the FIX session layer looks the same to a FIX engine as if the TCP socket were established via a private circuit."

-Matt

\> That’s O.k Ryan, but in case if the client is accessing through internet,all the clients cannot have fixengine connected to their systems from where they are trading.is there any way like FIX router/server…and what is the mode of messagetype between the client and FIX router/server.  
\> thanx  
\> nagesh  
\>  
\>  
\>  
\>  
\> \> I’d also like to mention that when using FIX via the Internet, security becomes more of an issue.  
\> \>  
\> \> Some of the more popular solutions include:  
\> \>  
\> \> 1. Using PGP-DES-MD5 FIX security. (This is the currently defined FIX security protocol)  
\> \>  
\> \> 2. Using SSL and/or TLS. (This is what the Encryption Working Group is leaning towards recommending as the future FIX security protocol)  
\> \>  
\> \> 3. Use a software or hardware-based VPN to pass your FIX session over the Internet using an encrypted and authenticated tunnel.  
\> \>  
\> \>  
\>

---

<div class="post-metadata">

**Author:** ![scott.atwell](https://avatars.discourse-cdn.com/v4/letter/s/51bf81/32.png) [@scott.atwell](https://forum.fixtrading.org/u/scott.atwell)\
**Post date:** [December 12, 2000, 1:43pm UTC](https://forum.fixtrading.org/t/fix-and-internet/3631/7 "2000-12-12T13:43:00Z")

</div>

I think it is also wise to define “client”. FIX is primarily designed as firm-to-firm (before the “B2B” term was coined 🙂 ). In addition, FIX has primarily been used for institutional trading vs. retail trading. I can’t tell if “client” is a client firm (customer) of the broker or if “client” is referring to a workstation/user. Typically a FIX engine sits in front of a set of users, and the linkage between the FIX engine and that set of users is defined outside of FIX (e.g. use of middleware) in an “intranet” fashion. I have seen FIX vendors who have placed a FIX engine in a browser successfully. I think you also have to consider how many endpoints you are dealing with. If that number is say, 200,000, then I would recommend the use of some middleware, ASP, etc. technology to handle some aggregation vs. considering a FIX session for each.

Matt is right, separatign the network linkage from the routing/aggregation/service bureau design should help you.

\> Sure they can. It depends on how you set it up, and on the engine. It sounds like you may be looking for a FIX engine/OMS ASP-type service, there are a few out there (Namsko comes to mind, there may be others.)  
\>  
\> Or are you trying to say that some clients have firewall issues to contend with & so are unable to make connections over the internet…?  
\>  
\> In any case - I’d seperate out the issue of the network solution (internet vs. private network vs. direct line) from whether an engine can be set up as a FIX message router (onBehalfOf…)  
\>  
\> as Scott Atwell said - “Use of the Interent for the FIX session layer looks the same to a FIX engine as if the TCP socket were established via a private circuit.”  
\>  
\> -Matt  
\>  
\>  
\> \> That’s O.k Ryan, but in case if the client is accessing through internet,all the clients cannot have fixengine connected to their systems from where they are trading.is there any way like FIX router/server…and what is the mode of messagetype between the client and FIX router/server.  
\> \> thanx  
\> \> nagesh  
\> \>  
\> \>  
\> \>  
\> \>  
\> \> \> I’d also like to mention that when using FIX via the Internet, security becomes more of an issue.  
\> \> \>  
\> \> \> Some of the more popular solutions include:  
\> \> \>  
\> \> \> 1. Using PGP-DES-MD5 FIX security. (This is the currently defined FIX security protocol)  
\> \> \>  
\> \> \> 2. Using SSL and/or TLS. (This is what the Encryption Working Group is leaning towards recommending as the future FIX security protocol)  
\> \> \>  
\> \> \> 3. Use a software or hardware-based VPN to pass your FIX session over the Internet using an encrypted and authenticated tunnel.  
\> \> \>  
\> \> \>  
\> \>  
\>
