# Possible issue with SettlInstMode

**URL:** <https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184>\
**Category:** General Q&A\
**Created:** [October 10, 2026, 8:10pm UTC](https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184 "2026-10-10T20:10:22Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![fixtrading](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.fixtrading.org/fixtrading/32/25_2.png) [@fixtrading](https://forum.fixtrading.org/u/fixtrading)\
**Post date:** [October 10, 2026, 8:10pm UTC](https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184/1 "2026-10-10T20:10:22Z")

</div>

Hello

Looking at the SettlementInstruction message and field SettInstMode, its description has all these options “1=Standing Instructions, 2=Specific Allocation Account Overriding, 3=Specific Allocation Account Standing , 4=Specific Order, 5=Reject SSI request” but the code set only has three of them. Where did the others go? The codeset has this cryptic message “Indicates mode used for Settlement Instructions message. \*\*\* SOME VALUES HAVE BEEN REPLACED - See “Replaced Features and Supported Approach” \*\*\*” but doesn’t say where or what the Replaced Features and Supported Approach is.

---

<div class="post-metadata">

**Author:** ![philipwhiuk](https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/32.png) [@philipwhiuk](https://forum.fixtrading.org/u/philipwhiuk)\
**Post date:** [October 12, 2026, 11:48am UTC](https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184/2 "2026-10-12T11:48:06Z")

</div>

This is part of FIX.4.4 changes, documented in FIX.4.4 Vol 6 (6-F)

> Removed “Default”, “Specific Allocation Account Overriding”, and “Specific Allocation Account Standing” values from SettlInstMode (tag 160) field

> Refer to “Volume 5 - Settlement Instruction Fields Usage Matrix” for further details.

However, Vol 5 with errata doesn’t actually seem to contain this usage matrix…

---

<div class="post-metadata">

**Author:** ![gtcpm](https://avatars.discourse-cdn.com/v4/letter/g/b2d939/32.png) [@gtcpm](https://forum.fixtrading.org/u/gtcpm)\
**Post date:** [October 12, 2026, 7:28pm UTC](https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184/3 "2026-10-12T19:28:58Z")

</div>

@fixtrading the deprecated values are not lost but not shown by default. You have to set the checkbox you get when you click on the three dots to the far right (see screenshot below).

 ![image](https://canada1.discourse-cdn.com/flex010/uploads/fixtrading2/original/1X/8649d76c1dd555091517798016f694e8fa5a5aa7.png)

The following was taken from the FIX 4.4 spec Volume 5:

> The Settlement Instructions message can be used in one of three modes (SettlInstMode):
> 
> 1. To provide “standing instructions” for the settlement of trades occurring in the future. The message could either be sent in an ‘unsolicited’ fashion (i.e. a ‘push’-style update from one firm to that firm’s counterparties) or in response to a Settlement Instruction Request message. In either of these scenarios, this message can provide multiple settlement instructions
> 
> 2 ) To reject a Settlement Instruction Request message (e.g. unable to process request, no matching settlement instructions found).
> 
> 1. To provide settlement instructions for a specific Order with a single account either as overriding or standing instructions to support matching. The ClOrdID field should be used to link the settlement instructions to the corresponding Order message.

The third item includes the deprecated values 2 and 3 (added in FIX 4.1) as they are specializations of value 4 that was added with FIX 4.3. The SettlementInstructions(35=T) message was significantly extended with FIX 4.4. @philipwhiuk I could also not find a “matrix”…

---

<div class="post-metadata">

**Author:** ![fixtrading](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.fixtrading.org/fixtrading/32/25_2.png) [@fixtrading](https://forum.fixtrading.org/u/fixtrading)\
**Post date:** [October 21, 2026, 8:31am UTC](https://forum.fixtrading.org/t/possible-issue-with-settlinstmode/18184/4 "2026-10-21T08:31:47Z")

</div>

Thanks everybody. So sounds like the list of values is fine but we have a reference to some documentation that doesn’t exist. We’ll note that as a candidate for errata.
