FIX tutorials?

, ,
1

Imported from previous forum

2

need serious help. I searched this forum for “FIX tutorials” or links, found none. Found the implementation. G00gled for FIX tutorials. I cant believe I found none tutorials. Just certifications. I did work as an Intern for TCS Morganstanley. They have these FIX tutorials. This was 6 months back. I was under ETS, no way near the FIX. I am trying to get some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what to do. Iam a student in 7th sem of engineering. I want to build a mini-stock exchange but bloody hell nothing to learn FIX. FIX is open but tutorials are not open :frowning:

Please help someone. a few introductions presented by your company will do.

Thank you

3

http://www.fixprotocol.org/specifications/.
You may drill down to whichever version of FIX suits your fancy.
Focus on Appendix D in a particular specification.
Good luck

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I cant
believe I found none tutorials. Just certifications. I did work as an
Intern for TCS Morganstanley. They have these FIX tutorials. This was 6
months back. I was under ETS, no way near the FIX. I am trying to get
some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your
company will do.

Thank you

4

Hi Adya,
There are lots of free documentation in the fixprotocol.org portal.
try to lookout under ‘About the protocol’ → Techinical/Specifications.

Good luck
Ambar

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I cant
believe I found none tutorials. Just certifications. I did work as an
Intern for TCS Morganstanley. They have these FIX tutorials. This was 6
months back. I was under ETS, no way near the FIX. I am trying to get
some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your
company will do.

Thank you

5

Yes, I am a beginner on FIX, and also found nothing to have a deep understand on the protocol. I tried to read the specifications, but just found a little boring to continue.

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I cant
believe I found none tutorials. Just certifications. I did work as an
Intern for TCS Morganstanley. They have these FIX tutorials. This was 6
months back. I was under ETS, no way near the FIX. I am trying to get
some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your
company will do.

Thank you

6

[ original email was from Ambar Arasan - ambar.arasan@tradeturquoise.com ]
Hi Sean/Adya,
Look out under ‘Technical Presentations / Documentation’ there are few interesting presentations, its clasified from beginners to advanced level. Though few of them are outdated they are worth reading to start with.

Happy reading and good luck for your projects.

Thanks
Ambar

Yes, I am a beginner on FIX, and also found nothing to have a deep
understand on the protocol. I tried to read the specifications, but just
found a little boring to continue.

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I
cant believe I found none tutorials. Just certifications. I did work
as an Intern for TCS Morganstanley. They have these FIX tutorials.
This was 6 months back. I was under ETS, no way near the FIX. I am
trying to get some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your company
will do.

Thank you

7

[ original email was from Ambar Arasan - ambar.arasan@tradeturquoise.com ]
To add to my below point, for qualified training you can register with NYFIX, check out
http://www.nyfix.com/training

Hi Sean/Adya, Look out under ‘Technical Presentations / Documentation’
there are few interesting presentations, its clasified from beginners to
advanced level. Though few of them are outdated they are worth reading
to start with.

Happy reading and good luck for your projects.

Thanks Ambar

Yes, I am a beginner on FIX, and also found nothing to have a deep
understand on the protocol. I tried to read the specifications, but
just found a little boring to continue.

need serious help. I searched this forum for “FIX tutorials” or
links, found none. Found the implementation. G00gled for FIX
tutorials. I cant believe I found none tutorials. Just
certifications. I did work as an Intern for TCS Morganstanley. They
have these FIX tutorials. This was 6 months back. I was under ETS,
no way near the FIX. I am trying to get some FIX tuto stuff but aint
getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno
what to do. Iam a student in 7th sem of engineering. I want to build
a mini- stock exchange but bloody hell nothing to learn FIX. FIX is
open but tutorials are not open :frowning:

Please help someone. a few introductions presented by your company
will do.

Thank you

8

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I cant
believe I found none tutorials. Just certifications. I did work as an
Intern for TCS Morganstanley. They have these FIX tutorials. This was 6
months back. I was under ETS, no way near the FIX. I am trying to get
some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your
company will do.

Thank you

Hi,

My favorite FIX dictionary can be found here:
http://www.onixs.biz/fixdictionary/

You should also check out Onix’s Programmer guides

C#:

C++:

Although these are specific to the Onix Fix engine they are clear and easy to understand (got me through the teething period when starting out).

I think you can also get a trial version of their FIX engine.

Good luck,
Valdimar

9

Thanks you all!

  • Sean

need serious help. I searched this forum for “FIX tutorials” or links,
found none. Found the implementation. G00gled for FIX tutorials. I
cant believe I found none tutorials. Just certifications. I did work
as an Intern for TCS Morganstanley. They have these FIX tutorials.
This was 6 months back. I was under ETS, no way near the FIX. I am
trying to get some FIX tuto stuff but aint getting any…

I saw a book on amazon, the FIX guide $18. I am in India, I donno what
to do. Iam a student in 7th sem of engineering. I want to build a mini-
stock exchange but bloody hell nothing to learn FIX. FIX is open but
tutorials are not open :frowning:

Please help someone. a few introductions presented by your company
will do.

Thank you

Hi,

My favorite FIX dictionary can be found here:
http://www.onixs.biz/fixdictionary/

You should also check out Onix’s Programmer guides

C#: http://www.onixs.biz/dotNetFIXEngineProgrammerGuide_webEdition.html
C++: http://www.onixs.biz/cppFixEngine/

Although these are specific to the Onix Fix engine they are clear
and easy to understand (got me through the teething period when
starting out).

I think you can also get a trial version of their FIX engine.

                           Good luck,
                            Valdimar
10

Srihari,

I am a student in 7th semester of engineering. I want to build a mini-stock exchange.

Wow! that’s a very cool project. The key to completing it will be to limit functionality to the bare bones. Otherwise the complexity is going to bog you down.

FIX is a HUGE specification. For now I suggest you try only to learn the barest minimum to build your mini-stock exchange. You can go back later and expand the model after that.

In FIX look at:

newOrderSingle
for equities only,
for a single type of order: limit, good for the day only

Remember that an exchange is really like two ebay type auctions going on, back to back:

  1. put SHARES on the auction block and sell to the highest bidder of CASH. (Bids)
  2. put CASH on the auction block and sell it to the highest bidder of SHARES(Offers) (OK, the quantity of shares is what’s fixed by the auction house, and quantity of cash varies, however you get the idea. At the end of the day cash leaves the auction house and shares arrive on this side. )

Start the day by opening each auction. Build the order book just prior to the open. The exchanges then matches any possible trades, reports executions and takes those defunct bids and offers off the order book.

To make life easy for you, just use FIX to send the FIX newOrderSingle Messages to the exchange and have the exchange generate FIX execution messages back to the “winners” as they occur.

Figure the Exchange reports the order book data, and the last sale price and volume data in any format they wish (not necessarily FIX). So don’t get hung up with using FIX here. Just throw that data up in a grid window and deem it “distributed to the whole marketplace.”

Skip all the parts about FIX heartbeats, setting up sessions, check summing, FIX engines, etc. Just figure out how to format two messages on top of an assumed reliable message pipe: newOrderSingle and ExecutionReport. NewOrderSingle goes in one direction only - to the exchange, ExecutionReport goes in one direction only - from the exchange.

Take a look at the following excel spreadsheet which has the entire Fix 5.0 data model.

http://www.itsdoc.org/wiki/tiki-file_galleries.php
Fix Related → FIX 5 Data Model

Start with MsgType tab and limit to “SingleGeneralOrderHandling” then you see the two messages you want:

ExecutionReport - note that is MsgID 9
NewOrderSingle - note that is MsgID 14

For now just ignore the rest.

Once you know the the MsgID’s (9 and 14 above) go to the msgContents tab to look up the contents. Just set the column MsgID to limit to 14 - NewOrderSingle

O.K. freak out - there are a lot of fields! But wait, most are not required, so go to the column Reqd and set that to 1 (true)
That’s better.

However some rows are for components (groups of fields) vs just simple fields, In this case for a newOrderSingle the groups are:
StandardHeader (1024)
Instrument (1003)
OrderQtyData (1011)
StandardTrailer (1025)

No problem, just “drill down” into each group. Set the MsgID to that number (eg 1024 for StandardHeader) and you will finally see the individual fields that make up that group (yes, there will be many optional fields you can ignore).

Once you know all the fields you want in your message you can go to the fields tab and get full instructions on what goes into that field, how to format it, and then on to the enums tab to get any enumerations. (Try only to use the minimum enums you need. No need to support them all!)

Once you can do all that, build your exchange and turn your project into your professor.

Forget for now anything about how your exchange will actually settle up the trade (collect cash from one party, pay to the other; collect securities ownership from one party, transfer ownership of those securities to the other. Those transactions are not in FIX protocol anyway. Welcome to standards wars, turf battles, impediments to straight through processing, etc. )

AFTER THAT, look at the following:

http://www.fixprotocol.org/documents/2518/MDOWG_Book_Mgt%20v20.doc
Book Management Recommended Practices
Version 2.0 - This document explains the proper conventions for managing an order book using FIX message formats and attribution.

That’s really how you do your order book. Then again if you are building an exchange be sure to also hire HPC people to do the internal matching algos and tweak the exchange hardware and communication circuits for maximum performance. And set up the regulatory/surveillance/audit department to police everything to keep the markets clean. Charge outrageous fees for the market data. Figure out how you will hook into other markets so you can display only the Global Best Bid and Offer (including bids and offers outside your exchange system). Figure out how to price trades (usually large discounts for people who post liquidity vs. people who hit liquidity and remove it, so add those data hooks). Sell memberships in the exchange but be aware that those members will in turn resell access via those connections to others Called “Sponsored memberships” in the U.S. Then try to regulate what those “sponsored members” are actually doing at any particular point in time. Bottom line - things get very complex very quickly.

and see

http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/Simulators

That is a very nice market simulator.

Remember the FIX protocol covers a very wide territory. Most of the time you only need a few parts of it. At the newOrderSingle level its very straightforward and simple to learn. Get your tag=value pairs lined up and send them out. Once you have mastered the basics you can ramp up the complexity of dealing with more esoteric things.

Also note too - the specification is not “tight”. It only provides a general environment that is part of a full, detailed, specific implementation. From FIX you must have detailed information from the counter party on exactly how they have applied it. Without that information the FIX specification alone is too loose. A huge reason to have a FIX engine is to store all that “customization data” which is highly specific, party-to-party. In building your exchange simulator you are going to have to provide the specific choices for your system (e.g. are you going to trade with security symbols or are you going to require CUSIP numbers? What will your targetID be? How will you validate the inbound orders?).

Remember the FIX protocol has evolved from a handful of point to point links with counter parties agreeing each time on the specifics.

Most large firms have a single person (or more) dedicated 100% to working on FIX connectivity. The estimated cost to implement FIX just a few years ago was minimally $50/k year for FIX engine, a few dedicated IP lines, related software and minimal support, etc. Some of that has changed with lower cost Internet connections VPN’s etc. However much of that point-to-point heritage and party by party detailed requirements remain.

Rick

11

Srihari,

I can sort a free connection on our simulated market for you to play with FIX.
Send me a private email if you are interested

12

Thank you sir :slight_smile: I am obliged

Srihari,

I can sort a free connection on our simulated market for you to play
with FIX. Send me a private email if you are interested

13

How can I thank you Rick?
Thank you so very very much :slight_smile:

Srihari,

I am a student in 7th semester of engineering. I want to build a mini-
stock exchange.

Wow! that’s a very cool project. The key to completing it will be to
limit functionality to the bare bones. Otherwise the complexity is going
to bog you down.

FIX is a HUGE specification. For now I suggest you try only to learn the
barest minimum to build your mini-stock exchange. You can go back later
and expand the model after that.

In FIX look at:

newOrderSingle for equities only, for a single type of order: limit,
good for the day only

Remember that an exchange is really like two ebay type auctions going
on, back to back:

  1. put SHARES on the auction block and sell to the highest bidder of
    CASH. (Bids) 2. put CASH on the auction block and sell it to the
    highest bidder of SHARES(Offers) (OK, the quantity of shares is
    what’s fixed by the auction house, and quantity of cash varies,
    however you get the idea. At the end of the day cash leaves the
    auction house and shares arrive on this side. )

Start the day by opening each auction. Build the order book just prior
to the open. The exchanges then matches any possible trades, reports
executions and takes those defunct bids and offers off the order book.

To make life easy for you, just use FIX to send the FIX newOrderSingle
Messages to the exchange and have the exchange generate FIX execution
messages back to the “winners” as they occur.

Figure the Exchange reports the order book data, and the last sale price
and volume data in any format they wish (not necessarily FIX). So don’t
get hung up with using FIX here. Just throw that data up in a grid
window and deem it “distributed to the whole marketplace.”

Skip all the parts about FIX heartbeats, setting up sessions,
check summing, FIX engines, etc. Just figure out how to format two
messages on top of an assumed reliable message pipe:
newOrderSingle and ExecutionReport. NewOrderSingle goes in one
direction only - to the exchange, ExecutionReport goes in one
direction only - from the exchange.

Take a look at the following excel spreadsheet which has the entire Fix
5.0 data model.

http://www.itsdoc.org/wiki/tiki-file_galleries.php Fix Related → FIX 5
Data Model

Start with MsgType tab and limit to “SingleGeneralOrderHandling” then
you see the two messages you want:

ExecutionReport - note that is MsgID 9 NewOrderSingle - note that
is MsgID 14

For now just ignore the rest.

Once you know the the MsgID’s (9 and 14 above) go to the msgContents tab
to look up the contents. Just set the column MsgID to limit to 14 -
NewOrderSingle

O.K. freak out - there are a lot of fields! But wait, most are
not required, so go to the column Reqd and set that to 1 (true)
That’s better.

However some rows are for components (groups of fields) vs just simple
fields, In this case for a newOrderSingle the groups are: StandardHeader
(1024) Instrument (1003) OrderQtyData (1011) StandardTrailer (1025)

No problem, just “drill down” into each group. Set the MsgID to that
number (eg 1024 for StandardHeader) and you will finally see the
individual fields that make up that group (yes, there will be many
optional fields you can ignore).

Once you know all the fields you want in your message you can go to the
fields tab and get full instructions on what goes into that field, how
to format it, and then on to the enums tab to get any enumerations. (Try
only to use the minimum enums you need. No need to support them all!)

Once you can do all that, build your exchange and turn your project into
your professor.

Forget for now anything about how your exchange will actually settle up
the trade (collect cash from one party, pay to the other; collect
securities ownership from one party, transfer ownership of those
securities to the other. Those transactions are not in FIX protocol
anyway. Welcome to standards wars, turf battles, impediments to straight
through processing, etc. )

AFTER THAT, look at the following:

http://www.fixprotocol.org/documents/2518/MDOWG_Book_Mgt%20v20.doc Book
Management Recommended Practices Version 2.0 - This document explains
the proper conventions for managing an order book using FIX message
formats and attribution.

That’s really how you do your order book. Then again if you are building
an exchange be sure to also hire HPC people to do the internal matching
algos and tweak the exchange hardware and communication circuits for
maximum performance. And set up the regulatory/surveillance/audit
department to police everything to keep the markets clean. Charge
outrageous fees for the market data. Figure out how you will hook into
other markets so you can display only the Global Best Bid and Offer
(including bids and offers outside your exchange system). Figure out how
to price trades (usually large discounts for people who post liquidity
vs. people who hit liquidity and remove it, so add those data hooks).
Sell memberships in the exchange but be aware that those members will in
turn resell access via those connections to others Called “Sponsored
memberships” in the U.S. Then try to regulate what those “sponsored
members” are actually doing at any particular point in time. Bottom line

  • things get very complex very quickly.

and see

http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/Simulators

That is a very nice market simulator.

Remember the FIX protocol covers a very wide territory. Most of the time
you only need a few parts of it. At the newOrderSingle level its very
straightforward and simple to learn. Get your tag=value pairs lined up
and send them out. Once you have mastered the basics you can ramp up the
complexity of dealing with more esoteric things.

Also note too - the specification is not “tight”. It only provides a
general environment that is part of a full, detailed, specific
implementation. From FIX you must have detailed information from the
counter party on exactly how they have applied it. Without that
information the FIX specification alone is too loose. A huge reason to
have a FIX engine is to store all that “customization data” which is
highly specific, party-to-party. In building your exchange simulator you
are going to have to provide the specific choices for your system (e.g.
are you going to trade with security symbols or are you going to require
CUSIP numbers? What will your targetID be? How will you validate the
inbound orders?).

Remember the FIX protocol has evolved from a handful of point to point
links with counter parties agreeing each time on the specifics.

Most large firms have a single person (or more) dedicated 100% to
working on FIX connectivity. The estimated cost to implement FIX just
a few years ago was minimally $50/k year for FIX engine, a few
dedicated IP lines, related software and minimal support, etc. Some of
that has changed with lower cost Internet connections VPN’s etc.
However much of that point-to-point heritage and party by party
detailed requirements remain.

Rick

14

How can I thank you Rick? Thank you so very very much :slight_smile:

Srihari,

Don’t thank me. Thank the founders of FIX for having the foresight to put the following sentences into FIX’s foundation trust indenture that are indeed brilliant:

FIX Protocol is open and free, but is not software. Rather, FIX is a specification which software developers can create commercial or open-source software, as they see fit.

Purposes … to insure that the FIX Protocol remains without charge to any person (whether involved in the provision of financial services or member of the general public) and that it is managed by an open vendor-neutral process.

My wish for you would be that you consider doing some of your academic work in well documented, open source code, and that others after you might benift from it. I’m not suggesting you give away any trading secrets or proprietary know how, just that you consider sharing the basics with everone. Prior to writing code, try to look at what others have done in open source or open standards, perhaps you are just duplicating others good work? That’s fine if you are just learning, however if you can refactor other open source code to suit your own purposes, and keep it very well documented and up to date, perhaps others might benefit too? They might stand on your shoulders.

Later on, if you continue in this career direction perhaps you will find time to donate to FIX to work on one of the numerous committees helping to support and refine the protocol. You don’t have to be a paid member to participate. It’s hard work however, because informed technical consensus does not come easy. It takes time and effort.

How is it that something that’s given away free is so valuable? It’s because so many people contributed their time and best thinking to it, and insured that it was developed and maintained in a “vendor-neutral process”. Then they gave it away for free.

If the entire world’s financial capital could move around to the very best opportunities with less friction, perhaps it might be possible earn 5 bp more per year in aggregate. Ask yourself if you think that might be feasible? Using good, clean, efficient trading standards, would 5 bp more return be a possibility?

FIX goes into emerging markets absolutely for free. They get to start right off the bat at the highest level. No need to “accumulate know how” gradually over time, like accumulating roads, bridges, ports and transportation infrastructure - start right out with the very best stuff on day one, just as soon as they are ready for access to worldwide capital.

Remember too what 5 bp more return on capital means for labor. You don’t have a 5 bp bump up in aggregate return on capital without also having a corresponding bump up in the return to labor. Best of all labor probably didn’t have to work any harder or become more productive - the capital was what picked up the pace.

Bottom line, trading standards can provide a very nice boost to worldwide wealth. While that alone won’t solve natural resource constraints, polution, health care, poverty, distribution inequity, political instability and other world wide problems, at least it increases wealth that can pay for some of those things.

I’m convinced that wide adoption of FIX and continuous improvements to it could indeed yield that 5 bp. If you get a chance and would like to help out in that effort I think you too would find it intrinsically rewarding.

Rick

15

Mr. Rick,

I love algorithms, I ‘always’ try to find a different solution to an existing problem. In my academics, we have these algorithmic problems around and I always try to follow the Golden principles of Algorithms, ‘complexity’ ‘efficiency’. I do have certain less complex and more efficient solutions to a few things and people have always appreciated that.
:slight_smile:

FIX is something new to me, I am quick learner and I have made financial markets my life. dedicated. I am studying the theoretical and technicals of the Financial markets. Thanks to my brother who was in the technical side of Morgan Stanley I did an internship over there. Financial markets are like stars. Stars are fascinating. When we were children and looked up in the sky we pondered and said ‘wow’, fascinating :slight_smile: Financial markets are the same to me, fascinating :slight_smile:

I have dedicated my life towards it now… will continue till death :slight_smile:

Thank you Rick, your words are inspiring

How can I thank you Rick? Thank you so very very much :slight_smile:

Srihari,

Don’t thank me. Thank the founders of FIX for having the foresight to
put the following sentences into FIX’s foundation trust indenture that
are indeed brilliant:

FIX Protocol is open and free, but is not software. Rather, FIX is a
specification which software developers can create commercial or open-
source software, as they see fit.

Purposes … to insure that the FIX Protocol remains without charge to
any person (whether involved in the provision of financial services or
member of the general public) and that it is managed by an open vendor-
neutral process.

My wish for you would be that you consider doing some of your academic
work in well documented, open source code, and that others after you
might benift from it. I’m not suggesting you give away any trading
secrets or proprietary know how, just that you consider sharing the
basics with everone. Prior to writing code, try to look at what others
have done in open source or open standards, perhaps you are just
duplicating others good work? That’s fine if you are just learning,
however if you can refactor other open source code to suit your own
purposes, and keep it very well documented and up to date, perhaps
others might benefit too? They might stand on your shoulders.

Later on, if you continue in this career direction perhaps you will find
time to donate to FIX to work on one of the numerous committees helping
to support and refine the protocol. You don’t have to be a paid member
to participate. It’s hard work however, because informed technical
consensus does not come easy. It takes time and effort.

How is it that something that’s given away free is so valuable? It’s
because so many people contributed their time and best thinking to it,
and insured that it was developed and maintained in a “vendor-neutral
process”. Then they gave it away for free.

If the entire world’s financial capital could move around to the very
best opportunities with less friction, perhaps it might be possible earn
5 bp more per year in aggregate. Ask yourself if you think that might be
feasible? Using good, clean, efficient trading standards, would 5 bp
more return be a possibility?

FIX goes into emerging markets absolutely for free. They get to start
right off the bat at the highest level. No need to “accumulate know
how” gradually over time, like accumulating roads, bridges, ports and
transportation infrastructure - start right out with the very best
stuff on day one, just as soon as they are ready for access to
worldwide capital.

Remember too what 5 bp more return on capital means for labor. You don’t
have a 5 bp bump up in aggregate return on capital without also having a
corresponding bump up in the return to labor. Best of all labor probably
didn’t have to work any harder or become more productive - the capital
was what picked up the pace.

Bottom line, trading standards can provide a very nice boost to
worldwide wealth. While that alone won’t solve natural resource
constraints, polution, health care, poverty, distribution inequity,
political instability and other world wide problems, at least it
increases wealth that can pay for some of those things.

I’m convinced that wide adoption of FIX and continuous improvements to
it could indeed yield that 5 bp. If you get a chance and would like to
help out in that effort I think you too would find it intrinsically
rewarding.

Rick

16

Hi.

How are you? Hope you are doing well!

I was reading this chat about FIX tutorials

[http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/Simulators

  • Site can’t be reached

http://www.nyfix.com/training

404 ## The site you were looking for couldn’t be found.

Do you have any good info, update and new web links on FIX tutorials?

Best Regards,

Hank

17

What about this?

Cheers,
Chris.

18

Hi Chris,
How are you?
Do you know any tutorials withstraightforward step–by-step procedures?
Thank you.
Hank

19

Hank,

I put together this following Intro To FIX presentation:

It’s geared toward people that don’t know much about FIX and gives them an introduction to what it is and what it’s used for.

3 Likes
20

After the introduction material pointed out by @christophjohn and @briandriscoll, you can look into an actual implementation. QuickFIX is a free and open source implementation of FIX. Please look here for some hands-on information to get this FIX engine up and running.

2 Likes