FAST Template Definition Specification for FIX

, ,
1

Imported from previous forum

2

Hi all,

I am developing a swx feed handler. since it is FIX format and encoded by FAST, I am looking for the template definition used for FAST. However, I cannot find it in the spec and I find this thread http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately, the hyper-link in that thread does not work anymore. Is there anyone knowing where I can find it?

Thank you.

Michael

3

Michael,

IIRC SWX provides a spec for their feed. If you want to read about the template spec format you’ll find information in the FAST 1.1 spec.

Let us know if you have any specific questions.

Best,
Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and encoded
by FAST, I am looking for the template definition used for FAST.
However, I cannot find it in the spec and I find this thread
http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately, the hyper-
link in that thread does not work anymore. Is there anyone knowing where
I can find it?

Thank you.

Michael

4

Thank you first,

Can you tell the file name you mention? I have a couple of specs:SWX-VCA-SPEC-CTI-301.pdf, SWX-VCA-SPEC-MDI-101_E.pdf,
SWX-VCA-SPEC-RDI-102_E.pdf, SWX-VCA-SPEC-STI-111E.pdf, SWX-VCA-ADM-CTI-304_E.pdf and SWX-VCA-CERT-STI-103_E.pdf.

Regards,
Michael

Michael,

IIRC SWX provides a spec for their feed. If you want to read about the
template spec format you’ll find information in the FAST 1.1 spec.

Let us know if you have any specific questions.

Best, Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and encoded
by FAST, I am looking for the template definition used for FAST.
However, I cannot find it in the spec and I find this thread
http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately, the
hyper- link in that thread does not work anymore. Is there anyone
knowing where I can find it?

Thank you.

Michael

5

If you are looking for the template file, you can ask the SWX support as well. It is available on their website and the file name should be similiar to MdiFastTemplates101_E.xml

Thanks,
Satish

Thank you first,

Can you tell the file name you mention? I have a couple of specs:SWX-VCA-SPEC-CTI-
301.pdf, SWX-VCA-SPEC-MDI-101_E.pdf, SWX-VCA-SPEC-RDI-102_E.pdf, SWX-VCA-SPEC-STI-
111E.pdf, SWX-VCA-ADM-CTI-304_E.pdf and SWX-VCA-CERT-STI-103_E.pdf.

Regards, Michael

Michael,

IIRC SWX provides a spec for their feed. If you want to read about the
template spec format you’ll find information in the FAST 1.1 spec.

Let us know if you have any specific questions.

Best, Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and
encoded by FAST, I am looking for the template definition used for
FAST. However, I cannot find it in the spec and I find this thread
http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately, the
hyper- link in that thread does not work anymore. Is there anyone
knowing where I can find it?

Thank you.

Michael

6

Satish,

I try to get this file from SWX support. As you know, it takes time to wait for responce. So I would like to know where I can download it from their website.

Thank you.
Michael

If you are looking for the template file, you can ask the SWX support as
well. It is available on their website and the file name should be
similiar to MdiFastTemplates101_E.xml

Thanks, Satish

Thank you first,

Can you tell the file name you mention? I have a couple of specs:SWX-VCA-SPEC-CTI-
301.pdf, SWX-VCA-SPEC-MDI-101_E.pdf, SWX-VCA-SPEC-RDI-102_E.pdf, SWX-VCA-SPEC-STI-
111E.pdf, SWX-VCA-ADM-CTI-304_E.pdf and SWX-VCA-CERT-STI-
103_E.pdf.

Regards, Michael

Michael,

IIRC SWX provides a spec for their feed. If you want to read
about the template spec format you’ll find information in the
FAST 1.1 spec.

Let us know if you have any specific questions.

Best, Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and
encoded by FAST, I am looking for the template definition used for
FAST. However, I cannot find it in the spec and I find this thread
http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately,
the hyper- link in that thread does not work anymore. Is there
anyone knowing where I can find it?

Thank you.

Michael

7

Hi Michael

The template file can be found on the ‘Market Data Interface (MDI) FAST Templates’ link on https://www.swx.com/member_section/it/downloads.html
You need to have an account created first as this is exchange proprietary file. You can request an account on the above mentioned url as well.

Actually you will find lot of stuff on the above url including specs, ref data, a sample multicast receiver in java and many more.

Thanks,
Satish

Satish,

I try to get this file from SWX support. As you know, it takes time to
wait for responce. So I would like to know where I can download it from
their website.

Thank you. Michael

If you are looking for the template file, you can ask the SWX support
as well. It is available on their website and the file name should be
similiar to MdiFastTemplates101_E.xml

Thanks, Satish

Thank you first,

Can you tell the file name you mention? I have a couple of specs:SWX-VCA-SPEC-CTI-
301.pdf, SWX-VCA-SPEC-MDI-101_E.pdf, SWX-VCA-SPEC-RDI-102_E.pdf, SWX-VCA-SPEC-STI-
111E.pdf, SWX-VCA-ADM-CTI-304_E.pdf and SWX-VCA-CERT-STI-
103_E.pdf.

Regards, Michael

Michael,

IIRC SWX provides a spec for their feed. If you want to read about
the template spec format you’ll find information in the FAST 1.1
spec.

Let us know if you have any specific questions.

Best, Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and
encoded by FAST, I am looking for the template definition used
for FAST. However, I cannot find it in the spec and I find this
thread http://www.fixprotocol.org/discuss/read/43dd4ec0.
unfortunately, the hyper- link in that thread does not work
anymore. Is there anyone knowing where I can find it?

Thank you.

Michael

8

Thank you Satish.

Hi Michael

The template file can be found on the ‘Market Data Interface (MDI)
FAST Templates’ link on
https://www.swx.com/member_section/it/downloads.html You need to have
an account created first as this is exchange proprietary file. You can
request an account on the above mentioned url as well.

Actually you will find lot of stuff on the above url including specs,
ref data, a sample multicast receiver in java and many more.

Thanks, Satish

Satish,

I try to get this file from SWX support. As you know, it takes time to
wait for responce. So I would like to know where I can download it
from their website.

Thank you. Michael

If you are looking for the template file, you can ask the SWX
support as well. It is available on their website and the file name
should be similiar to MdiFastTemplates101_E.xml

Thanks, Satish

Thank you first,

Can you tell the file name you mention? I have a couple of specs:SWX-VCA-SPEC-CTI-
301.pdf, SWX-VCA-SPEC-MDI-101_E.pdf, SWX-VCA-SPEC-RDI-102_E.pdf,
SWX-VCA-SPEC-STI- 111E.pdf, SWX-VCA-ADM-CTI-304_E.pdf and SWX-VCA-CERT-STI-
103_E.pdf.

Regards, Michael

Michael,

IIRC SWX provides a spec for their feed. If you want to read
about the template spec format you’ll find information in the
FAST 1.1 spec.

Let us know if you have any specific questions.

Best, Rolf

Hi all,

I am developing a swx feed handler. since it is FIX format and
encoded by FAST, I am looking for the template definition used
for FAST. However, I cannot find it in the spec and I find
this thread http://www.fixprotocol.org/discuss/read/43dd4ec0.
unfortunately, the hyper- link in that thread does not work
anymore. Is there anyone knowing where I can find it?

Thank you.

Michael

9

Try:
https://www.swxeurope.com/member_section/download/downloads/MdiFastTemplates

Micheal

Can you call me or email when you have a chance.

I work for Instinet, Europe

naresh.maharaj@instinet.co.uk

Thanks

Hi all,

I am developing a swx feed handler. since it is FIX format and encoded
by FAST, I am looking for the template definition used for FAST.
However, I cannot find it in the spec and I find this thread
http://www.fixprotocol.org/discuss/read/43dd4ec0. unfortunately, the hyper-
link in that thread does not work anymore. Is there anyone knowing where
I can find it?

Thank you.

Michael